• Kecessa@sh.itjust.works
    link
    fedilink
    English
    arrow-up
    13
    arrow-down
    7
    ·
    edit-2
    8 hours ago

    That’s the first part, used correctly it’s a non issue so just use your nonstick correctly.

    • endeavor@sopuli.xyz
      link
      fedilink
      English
      arrow-up
      56
      arrow-down
      5
      ·
      7 hours ago

      Using nonstick correctly: Dont use anything but silicone spatulas on it, do not use more than 50% of your stoves power or gas stove or you will get cancer and die. Buy a new one every 5 years anyway since it somehow became stick pan.

      Using stainless pan: Find it from some junk metal pile, discover it was manufactured in the roman empire, give it a good scrub. Use it on any source imaginable and when hawk thuah slides around instead of sizzles, it’s good to go.

      • Kusimulkku@lemm.ee
        link
        fedilink
        English
        arrow-up
        3
        arrow-down
        2
        ·
        4 hours ago

        Using nonstick correctly: Don’t use metal and don’t heat it over 260 °C

      • brad_troika (he/him)@lemm.ee
        link
        fedilink
        English
        arrow-up
        9
        arrow-down
        12
        ·
        7 hours ago

        Source on the pan giving you cancer?

        Yes, non-stick becomes stick because the teflon coating comes off, it’s really hard to make teflon stick to anything. Using metal utensils will hasten this but afaik simply using heat will help loosen the teflon coating.

        I don’t mind buying a new non-stick pan about every 5 years (last one lasted 7), I usuall stick to the cheapest ones, they serve a specific service to me that stainless ones can’t do.

        • endeavor@sopuli.xyz
          link
          fedilink
          English
          arrow-up
          18
          arrow-down
          2
          ·
          edit-2
          6 hours ago

          Are you really asking “provide proofs of a pan I am warned to not heat up too much as the vapours will cause flu like symptoms and kill pet avians is bad for my health.” is bad for you? It is. Why do you think you need to buy new pans every x years? Cause the non-stick layer wears off. Do bits of coating that contain top tier carciogens which are considered safe unless ingested magically vanish into the void? Yes. Except the void is your body.

          I have been relying on my teflons less and less the more I get good with the stainless. I’ve now been making crepes and japanese omlets with less sticking than my few years old teflons.

          • brad_troika (he/him)@lemm.ee
            link
            fedilink
            English
            arrow-up
            2
            arrow-down
            5
            ·
            2 hours ago

            Afaik the coating is not a carcinogen only under certain circumstances like high heat can it produce something unsafe but even there it’s just potential, not yet proved to be carcinogenic but feel free to prove me wrong.

          • brad_troika (he/him)@lemm.ee
            link
            fedilink
            English
            arrow-up
            2
            arrow-down
            3
            ·
            2 hours ago

            The part you quoted says nothing about cancer, article only mentions potential risks with no evidence and no article cited. I’m sorry but articles like these are why people believe chocolate cures cancer or sitting down is as bad as smoking.

            I don’t claim there’s no connection but so far I’ve seen no evidence.

            • RememberTheApollo_@lemmy.world
              link
              fedilink
              English
              arrow-up
              1
              arrow-down
              1
              ·
              55 minutes ago

              I don’r know why you’re downvoted. That’s not an unfair assessment of the article. I offered it more as inference that the release of toxins when overheating the material is releasing potential toxins, the toxins being carcinogenic. I take the view that what effectively amounts to burning many materials releases carcinogens and toxins, particularly man-made materials.

        • HikingVet@lemmy.ca
          link
          fedilink
          English
          arrow-up
          6
          ·
          7 hours ago

          I bought a cheap stainless pan about 20 years ago. Don’t have issues with food sticking, don’t have to worry abouy coatings coming off, and if the handle breaks I can make a new one.

          Coating breaks down, stainless doesn’t.

          • nomy@lemmy.zip
            link
            fedilink
            English
            arrow-up
            3
            ·
            2 hours ago

            I have a mix of stainless steel and cast iron. I’m not terribly worried about consuming small amounts of either of those.

            A bonus is that because it’s all metal I can use most of it in ovens or while cooking outdoors.

            Sticking isn’t really that much of an issue if you’re careful. I feel like non-stick would’ve never taken off if people knew how toxic it was in 1970.

    • I_Miss_Daniel@lemmy.world
      link
      fedilink
      English
      arrow-up
      21
      ·
      9 hours ago

      In other words don’t do what I did and put half a litre into a $6 pot on your new induction cooktop and set it to 2kW to see how long it takes to boil.

      It boils quick.

      It then boils more enthusiastically than you’ve ever seen before, and a cancerous stench fills the air as the coating breaks down and the pot deforms.

    • Valmond@lemmy.world
      link
      fedilink
      English
      arrow-up
      9
      arrow-down
      1
      ·
      edit-2
      8 hours ago

      Like throw it away every 6 months.

      Edit: or 1 or 2 years, it was hyperbole. Instead of like never throwing it out?

      • pistonfish@feddit.org
        link
        fedilink
        English
        arrow-up
        5
        arrow-down
        2
        ·
        8 hours ago

        The nonstick pans I’ve using are several years old now without any signs of deteriorating nonstick surfaces. Use cookware out of wood or plastic to not scrape off the coating.

        • endeavor@sopuli.xyz
          link
          fedilink
          English
          arrow-up
          14
          arrow-down
          1
          ·
          7 hours ago

          I have 1 big nonstick and 1 small nonstick. They never saw high heat, they never saw ANY metal instruments, when stored they are protected by felt so nothing hard touches them, they never seen a steel sponge and they still became regular stick pans 2 years into their lifespan. Before you say “skill issue buying the pan” they were mid level (expensive pans for no cooks) pans from a reputable company. I have been a pro chef as well. Nonsticks are a wear item even if you treat them like shit on a stick. My oldest stainless is like 40 years old, has a huge dent on the side and works the same as it did on day one. I dug it out of someones fishing shed.

          • FuglyDuck@lemmy.world
            link
            fedilink
            English
            arrow-up
            7
            ·
            7 hours ago

            I have a kitchen full of nonstick pans. They’ve been in use since my grandma’s mom.

            Got them from grandma.

            Don’t freak out but cast iron was the OG nonstick, right?

            • endeavor@sopuli.xyz
              link
              fedilink
              English
              arrow-up
              4
              ·
              5 hours ago

              All it takes to become a chef is to accept the back breaking underpaid labour of working in a kitchen and following instructions. There are no preliminary requirements, only time invested.

      • idunnololz@lemmy.world
        link
        fedilink
        English
        arrow-up
        4
        arrow-down
        1
        ·
        edit-2
        9 hours ago

        I’ve had mine for 2 years now. It’s still non stick and I cook extremely regularly. Eg. 90% of my meals are cooked by me. I think some non stick pans are shit though because one of the ones I own started deteriorating after a year.

      • Kecessa@sh.itjust.works
        link
        fedilink
        English
        arrow-up
        1
        arrow-down
        13
        ·
        edit-2
        8 hours ago

        If you use it incorrectly then yeah. You might as well stop making food as well because clearly you don’t know what you’re doing.